Wednesday, June 6, 2012

DIY Vest

For this DIY, you will need a yard of fabric, scissors and 5 minutes to spare.

Start off by folding your fabric in half (side to side not top to bottom) and cut the bottom to the length that you would like.


Once you have made your cut, unfold the fabric and lay it out flat.


Now comes the tricky part.....my method for cutting the arm holes was to lay down on the fabric and make a dent on where my shoulders were.  I got up and cut a slit at an angle underneath where my shoulder mark was.  Repeat the same steps for the other arm hole.


Note:  After trying it on I ended up cutting more off the bottom.  So don't worry about your length on the first time, you can always adjust it.

No comments: